DNC / file transfer settings for Brother TC-32 A
Set the following parameters on the machine:
Set ConnectCNC as follows:
Cable Pin Out
Sometimes file transfer will not run, even if all the settings are correct.|
The following procedure may correct the problem, especially if you’re running the machine via DNC:
Check to make sure your FIFO buffers disabled on the PC.
You access the settings in Control Panel -> System -> Hardware tab -> Device Manager.
Find your COM ports and double click the one you're communicating with.
Click the tab for Port Settings then Advanced. Uncheck the FIFO buffers.
Having this turned on can cause problems with RS232 transfer, especially DNC.
|Once you have ConnectCNC and your CNC machines communicating, we strongly suggest you take the following precautions:|
- Download some programs, the longer the better, from your CNC to the pc. Save them under a temporary filename so you don't overwrite the original files. Examine them for errors such as dropped or changed text.
Do this for the first few programs that you use.
These settings have been collected from users of
our software and machine tool distributers. We have listed them to
help users of ConnectCNC to communicate between their computers and